Tektronix TDS Series - Page 11

TDS Family Oscilloscope Programmer Manual
vii
Preface
This programmer manual covers the TDS 420A, 430A, 460A, 510A, 520B,
540B, 620B, 644B, 680B, 684B, 724A, 744A, 754A, 782A, & 784A. It also
covers Advanced DSP Math (optional on the TDS420A, 430A, 460A, 510A,
520B, 540B, 620B, & 680B), the RS-232/Centronics Interface (optional on the
TDS 420A, 430A, 460A, 510A, 520B, 540B, 620B, & 640B), and the Option 05
Video Trigger. This manual provides information on operating your oscilloscope
using the General Purpose Interface Bus (GPIB) interface.
Related Manuals
Table i lists other documentation for the TDS 420A, 430A, 460A, 510A, 520B,
540B, 620B, 644B, 680B, 684B, 724A, 744A, 754A, 782A, & 784A digitizing
oscilloscopes.
Table i: Other Documentation
Manual Tek Part Number
  
TDS 420A, 430A, 460A, & 510A 070–9701–XX
TDS 500B, 600B, & 700A 070–9719–XX
TDS 500A/B & 600A/B Option 05 Video Trigger 070–8748–XX
TDS Reference
TDS 420A, 430A, & 460A 070–9700–XX
TDS 500B, 600B, & 700A 070–9382–XX
TDS Performance Verification
TDS 420A, 430A, & 460A 070–9705–XX
TDS 510A 070–9706–XX
TDS 500B, 600B, & 700A 070–9720–XX
TDS Service Manual
TDS 420A, 430A, & 460A 070–9703–XX
TDS 510A 070–9704–XX
TDS 500B, 600B, & 700A 070–9721–XX