Tektronix TDS Series - Page 331

Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–311
Zoom
ZOOm:STATE { OFF | ON | PREView }
ZOOm:STATE?
ZOOm
<Space>
?
OFF
:
ON
STATE
PREView
OFF turns Zoom mode off.
ON turns Zoom mode on. When InstaVu is in use, the state value becomes a
requested value, to be restored when InstaVu is switched off. Do not use this
condition if InstaVu is on. InstaVu overrides the zoom on state.
PREView sets ZOOM:STATE to preview. Also, it causes the oscilloscope to
display both the ZOOM:STATE OFF and ZOOM:STATE ON traces simulta-
neously in dual, half-height graticules. Do not use this condition if InstaVu is on.
InstaVu overrides the zoom preview state.
ZOOM:STATE ON
enables the Zoom feature.
ZOOM:STATE?
returns OFF, PREVIEW, or ON depending on the state of Zoom mode.
ZOOm:VERTical:POSition
Sets or queries the vertical position of waveforms.
Zoom
ZOOm:VERTical:POSition <NR3>
ZOOm:VERTical:POSition?
Group
Syntax
Arguments
Examples
Group
Syntax