Command Descriptions
TDS200/1000/2000 Series Oscilloscope Programmer Manual
2ā135
SET?
NOTE . The SET? query always returns command headers, regardless
of the setting of the HEADer command. This is because the returned
data is intended to be able to be sent back to the oscilloscope as
concatenated commands. The VERBose command can still be used to
specify whether the returned headers should be abbreviated or full
length.
Most oscilloscope settings.
SET?
a partial return string may look like this:
:ACQUIRE:STOPAFTER RUNSTOP;STATE 1;MODE SAMPLE;
NUMAVG 16;:HEADER 1;:VERBOSE 1;:DISPLAY:FORMAT YT;STYLE
VECTORS;PERSISTENCE 500.0Eā3;CONTRAST 50;:LOCK
NONE;:HARDCOPY:FORMAT EPSON;PORT RS232;LAYOUT PORTRAIT;
HEADer, *LRN?, VERBose
*SRE
(Service Request Enable) sets and queries the bits in the Service
Request Enable Register (SRER). Refer to the Status and Events
chapter on page 3-1 for more information.
Status and Error
*SRE <NR1>
*SRE?
Syntax
Returns
Examples
Related Commands
Group
Syntax
To Next Page
Loading...
Need help?
General
