Tektronix TDS1012 Programmer's Manual

Command Descriptions
TDS200/1000/2000 Series Oscilloscope Programmer Manual
2−145
ACQuire:STOPAfter
TRIGger:MAIn:PULse? (Query Only)
NOTE. You can use this command ONLY with the TDS1000 and
TDS2000 series.
Returns the pulse trigger parameters.
Trigger
TRIGger:MAIn:PULse?
TRIGger:MAIn:PULse?
might return :TRIGGER:MAIN:PULSE:SOURCE CH1;WIDTH:POLARITY
POSITIVE;WHEN EQUAL;WIDTH 1.0E−3
TRIGger:MAIn:PULse:SOUrce
NOTE. You can use this command ONLY with the TDS1000 and
TDS2000 series.
Sets or queries the source for the pulse trigger. This is equivalent to
setting the Source option in the Trigger menu.
Trigger
Related Commands
Group
Syntax
Examples
Group

Tektronix TDS1012 Specifications

General

Brand	Tektronix
Model	TDS1012
Category	Test Equipment
Language	English