Tektronix TDS1012 Programmer's Manual

Command Descriptions
TDS200/1000/2000 Series Oscilloscope Programmer Manual
2−159
WFMPre:BIT_Nr
Sets or queries the number of bits per waveform point for the
waveform to be transferred. Changing the value of WFMPre:BIT_Nr
also changes the values of WFMPRe:BYT_Nr and DATa:WIDth.
Waveform
WFMPre:BIT_Nr <NR1>
WFMPre:BIT_Nr?
<NR1> is either 8 or 16, and is equivalent to WFMPre:BYT_Nr * 8
and DATa:WIDth * 8.
WFMPre:BIT_Nr?
might return 8, indicating that there are 8 bits per waveform point.
DATa:WIDth
WFMPre:BN_Fmt
Sets or queries the format of binary data for the waveform to be
transferred. Changing the value of WFMPre:BN_Fmt also changes
the value of DATa:ENCdg.
Waveform
WFMPre:BN_Fmt { RI | RP }
WFMPre:BN_Fmt?
Group
Syntax
Arguments
Examples
Related Commands
Group
Syntax

Tektronix TDS1012 Specifications

General

Brand	Tektronix
Model	TDS1012
Category	Test Equipment
Language	English