Tektronix TDS2001C Service Manual

TDS2000C and TDS1000C-EDU Series
Digital Storage Oscilloscopes
ZZZ
Service Manual
xx
Revision A
This document applies to TDS2000C and TDS1000C-EDU
models with serial numbers of C030000 and above.
This document applies to firmware version 1.00 and above.
Warning
The servicing instructions are for use by qualified personnel
only. To avoid personal injury, do not perform any servicing
unless you are qualified to do so. Refer to all safety summaries
prior to performing service.
www.tektronix.com
077-0446-02

Tektronix TDS2001C Specifications

General

Bandwidth	100 MHz
Sample Rate	1 GS/s
Channels	2
Memory Depth	2.5 kpts
Vertical Resolution	8 bits
Vertical Sensitivity	2 mV/div to 5 V/div
Timebase Range	5 ns/div to 50 s/div
Display Type	Color LCD
Display Resolution	320 x 240 pixels
Connectivity	USB 2.0
Trigger Modes	Auto, Normal, Single
Interface	USB 2.0
Display	LCD
Trigger Types	Edge, Pulse, Video
Display Size	5.7 inches
Input Impedance	1 MΩ
Power Supply	100 to 240 V ±10%, 50 to 60 Hz