Tektronix TDS2022 - Page 160

Command Descriptions
2−142
TDS200/1000/2000 Series Oscilloscope Programmer Manual
If the trigger frequency is less than 10 Hz, the query returns 9.9e37
and generates error 2207 (Measurement error, Measurement
overflow).
If the trigger type is video, the query returns 9.9e37 and generates
event 221 (Settings conflict).
Trigger
TRIGger:MAIn:FREQuency?
Edge or pulse width trigger frequency
TRIGger:MAIn:FREQuency?
might return :TRIGGER:MAIN:FREQUENCY 1.0E3
MEASUrement:IMMed:VALue?
TRIGger:MAIn:HOLDOff? (Query Only)
Returns the trigger holdoff value.
Trigger
TRIGger:MAIn:HOLDOff?
Main trigger holdoff value
Group
Syntax
Returns
Examples
Related Commands
Group
Syntax
Returns