Tekvox TEK 1201-HD User Manual

TEK 1201-HD Presentation Switcher
User’s Manual
March 10, 2015
Please read this manual carefully before using the system.

Tekvox TEK 1201-HD Specifications

General

Video Bandwidth	10.2 Gbps
HDMI Compliance	HDMI 1.4
HDCP Compliance	HDCP 1.4
Video Resolution	Up to 4K@30Hz
Audio Support	LPCM, Dolby Digital, DTS
Power Supply	5V/1A DC
Port Type	HDMI Type A
HDCP Support	HDCP 1.4
EDID Management	Yes
Control	RS-232, IR
Ports	HDMI
Resolution Support	480i, 480p, 720p, 1080i, 1080p, 4K

Summary

Operation Notice

Safety and Usage Guidelines

Essential safety and operational guidelines for proper product use and user protection.

Connection Diagram

System Connection Layout

Visual representation of how the TEK 1201-HD connects to other devices.

Video and Audio Input/Output

Video and Audio Input/Output (Continued)

OSD Operation and Settings

RS-232 Control Interface

RS-232 Communication Protocol

Baud rate, data bits, stop bits, and connector pinout.

RS-232 Command Reference

List of commands for controlling the switcher via RS-232.

TCP/IP Network Control

IP Configuration for Control

Setting up network parameters for TCP/IP control.

TCP/IP Connection and Commands

Establishing TCP/IP connection and sending commands.

Firmware Updating

Firmware Update Procedure

Steps for updating firmware via USB flash drive.

Troubleshooting and Maintenance

Common Issues and Solutions

Guidance for resolving common operational and display problems.