To Next PageTo Next Page
Need help?Do you have a question about the Telcoma Automations T224 and is the answer not in the manual?
General| Brand | Telcoma Automations |
|---|---|
| Model | T224 |
| Category | Control Unit |
| Language | English |
Controls one or two 24 VDC motors, with or without encoder.
Lists the automation capabilities and control unit features.
Provides electrical parameters, absorption, and dimensions.
Diagram illustrating the control unit's terminals and components.
Lists and describes each numbered part of the control unit.
Instructions for installing the optional CB24 battery charger.
Provides recommendations for safe and proper electrical wiring.
Diagram showing the system's wiring connections for various components.
Illustrates 230V power, 24V motor, and encoder connections.
Table listing terminals, devices, voltage, current, and function.
Defines which terminals are for inputs and outputs.
Detailed steps for positioning motors and checking connections.
Important notes before starting time and pause programming.
Step-by-step instructions for automatic time programming.
Key points regarding encoder detection and error signals.
Step-by-step instructions for advanced manual programming.
Details the sequence for setting leaf delays and deceleration.
Steps to modify the pause time setting.
Procedure for setting pedestrian opening for motor 1.
Table explaining the functions of each dip switch.
Details input modes, motor control, and photo-close settings.
How to ensure correct operation of photocell safety features.
Instructions for connecting and memorizing radio receiver codes.
Checks for correct operation of safety and control devices.
Guidelines for qualified personnel regarding safety and standards.
Instructions for product disposal and CE declaration.
Covers failures due to manufacturing faults and invalidation conditions.
Summaries of warranty terms in Italian, French, Spanish, and German.
