To Next PageTo Next Page
Need help?Do you have a question about the Telcoma EVO600 and is the answer not in the manual?
Details physical components of the gearmotor using Fig. A.
Provides key specifications for different EVO models.
Essential pre-installation steps and warnings for installers.
Crucial safety guidelines for automation system installation and user protection.
Step-by-step instructions for mounting the gearmotor and rack correctly.
Guide for correctly installing and positioning magnetic limit switches.
How to manually release or lock the gear motor in case of power failure.
Identifies and describes the functions of various parts of the control unit board.
Explains encoder function, OC2 receiver use, and photocell tests.
Details terminal connections for power supply, inputs, and outputs on the control unit.
Advice on cable sizing, routing, and connecting control signals for proper installation.
Explains how to configure the system's functionality using dip-switches.
How to adjust motor force and control the soft start feature.
Procedure to program the gate's travel limits and pause time.
How to set a partial opening for pedestrian access.
Setting slowdown zones and choosing between normal/enhanced deceleration.
Guidance on product disposal and manufacturer's compliance statement.
Details the warranty coverage, conditions, and exclusions for the product.
General| Power supply | 230V AC |
|---|---|
| Motor power supply | 24V DC |
| Operating temperature | -20°C to +55°C |
| Protection fuse | 5A |
| Maximum Gate Weight | 600 kg |
| Opening Speed | 12 m/min |
| Closing Speed | 12 m/min |
| Protection Class | IP44 |
| Motor Type | DC |
| Safety Features | Obstacle detection |
