Telcoma PASSO - MEANING OF NAMES AND SOUNDS; MASTER code; USER code; Buzzer sounds

To Next Page

To Previous Page

MASTER code

USER code

Buzzer sounds:

This code is used by the installer for the programming of the entire

system. The factory set code is 12345678. The replacement of this co-

de should be the first programming operation to be performed.

This is the code that is used by the user. When programming, the

length of the code from 1 to 8 numbers can be decided.

As already mentioned in the keypad, a buzzer is present that makes a

sound during the various phases:

“beep”: each time a key is pressed

“beep“ with a different tone: signals that the operation has been per-

formed

“beep beep”: exit of the programming due to time-out

“beep beep beep beep”: signals an error

10 beeps: signals a fault or no line

MASTER code

USER code

Buzzer sounds:

This code is used by the installer for the programming of the entire

system. The factory set code is 12345678. The replacement of this co-

de should be the first programming operation to be performed.

This is the code that is used by the user. When programming, the

length of the code from 1 to 8 numbers can be decided.

As already mentioned in the keypad, a buzzer is present that makes a

sound during the various phases:

“beep”: each time a key is pressed

“beep“ with a different tone: signals that the operation has been per-

formed

“beep beep”: exit of the programming due to time-out

“beep beep beep beep”: signals an error

10 beeps: signals a fault or no line

MEANING OF NAMES AND SOUNDS

Via Soldati, 14 - 31040 SALGAREDA (TV)

Telefono/Fax 0422 80 76 45

E-mail: stampa@marpress.net - www.marpress.net

TIPOGRAFIA DIGITALE

Manuali e fogli istruzione

Listini prezzi

Presentazioni

Volantini

Giornaletti

Depliant

ecc...

Libri a bassa tiratura