Telcoma PASSO - PROGRAMMING - REPLACEMENT OF THE MASTER CODE

50
50
PROGRAMMING – REPLACEMENT OF THE MASTER CODE
PROGRAMMING – REPLACEMENT OF THE MASTER CODE
GB
GB
The factory set code is
press and hold the key for approx. 2 seconds until the keypad be-
eps once.
introduce the MASTER code followed by , the LED remains on.
enter , the LED starts to flash
enter the new MASTER code followed by (e.g.: 2233), a beep is he-
ard and the LED f continues flashing
enter the new MASTER code again followed by , a beep is heard
and the LED stops flashing. The operation has been successfully
completed.
2 sec. old MASTER command new confirm new
MASTER MASTER
12345678.
#
#
90#
#
#
# 12345678# 90# 2233# 2233#
·
·
·
·
·
Example
☼
☼
☼
The factory set code is
press and hold the key for approx. 2 seconds until the keypad be-
eps once.
introduce the MASTER code followed by , the LED remains on.
enter , the LED starts to flash
enter the new MASTER code followed by (e.g.: 2233), a beep is he-
ard and the LED f continues flashing
enter the new MASTER code again followed by , a beep is heard
and the LED stops flashing. The operation has been successfully
completed.
2 sec. old MASTER command new confirm new
MASTER MASTER
12345678.
#
#
90#
#
#
# 12345678# 90# 2233# 2233#
·
·
·
·
·
Example
☼
☼
☼