What to do if I forgot the password for my Teldat Network Router?
If you've forgotten your access password for the Teldat Network Router, you can ignore the current configuration by using the RST button. Refer to the relevant section for detailed instructions on how to do this.
Why are none of the LEDs lighting up on my Teldat Network Router?
If none of the LEDs on your Teldat Network Router are lighting up, check the power supply. This includes verifying the power source, the ON/OFF switch, and the main power outlet.
General| Manufacturer | Teldat |
|---|---|
| Model | RCTM2H001UP |
| Type | Router |
| Category | Network Router |
| Ports | 4 x Ethernet LAN, 1 x Ethernet WAN |
| Wireless | 802.11b/g/n |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
Covers manual scope, supported devices, content overview, organization, and technical support.
Details the different Teldat M2/M2L models, their features, power supply, and hardware monitoring.
Describes device components, panels, and installation procedures (standalone, wall, rack).
Covers power source, data connections (Ethernet, WAN, xDSL), and SIM card installation.
Details anti-theft cable mounting and RST button functions for rebooting and configuration.
Provides manufacturer details, risk identification, and essential safety warnings.
Details WEEE, REACH, PSU efficiency, EC declaration, CE marking, and national restrictions.
Specifies intended use, operating frequencies, and power transmission for the equipment.
Guides on resolving common issues and updating the router's software.
Details console connection, connectors, and comprehensive technical specifications for the device.
Details radio frequency specifications for LTE/WCDMA/GSM and Wi-Fi interfaces.
To Next Page
