CHANGEBATTERIES
1. Remove the (a) clip (2 screws).
2. Remove the (b ) battery lid (2 screws).
3. Put the batteries in (3 x 1.5V AA batteries).
4. Put the battery lid (b) back (2 screws).
5. Put the clip (a) back (2 screws).
STARTTHETRANSMITTER
1. Press the ON button for at least 1 second until the red LED lights.
The red LED flashes when the transmitter is on.
TURNTHETRANSMITTEROFF
1. Press the OFF button.
The red LED goes out.
AUTOMATICSHUTDOWN
When no buttons have been pressed for 3 minutes, the transmitter turns off.
- 9 -
To Next Page
Loading...
Need help?
General
