EasyManuals Logo

Teleco TFV20D User Manual

Teleco TFV20D
Go to English
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
English - 49 -
To turn off the television : Press and hold down the
centre of the Down button for a few seconds until the
television enters Standby mode.
Putting batteries in the remote control
Lift the cover at the back of the remote control.
Insert two AAAsize batteries. Make sure that the +
and ends of the batteries match the in the battery
compartment (respect the right polarity). Put the cover
back in place. Don’t mix different type of batteries or
new and used batteries.
Connecting the power cord
IMPORTANT: The TV set is designed to operate on
110-240V AC, 50/60 Hz socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna Connection
Connect the aerial or cable TV plug to the AERIAL
INPUT (ANT) socket or satellite plug to SATELLITE
INPUT (LNB) socket located on the back of the TV.
satellite
aerial
or
cable
REAR
OF
THE TV
Notication
Manufactured under licence from Dolby Laboratories
MANUFACTURED UNDER LICENCE
"Dolby" and the double D symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI logo and the high definition
multimedia interface are marks or registered
trademarks of HDMI Licensing LLC.
Information applicable to users in relation to
disposal of old devices and batteries
[European Union only]
This symbol indicates that the equipment should not
be disposed of as household waste. If you have to
discard the TV set or the batteries, consider using
collection systems or infrastructure for appropriate
recycling.
Note: The Pb sign inscribed on the batteries indicates
that the battery contains lead.
Products
Battery
Technical details
TV Frequency (tuner)
VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND
Number of memorable
channels
10000
Audio standard German +Nicam Stereo
On screen display On Screen Display
RF Input Socket 75 Ohms (unbalanced)
Operating voltage: 110-240V AC, 50/60 Hz.
AUDIO OUTPUT
POWER (WRMS.) (10%
THD)
2 x 2,5 WRMS
Power consumption 45W (max)
st-by power
consumption
1 W (max)
Weight Stand 3,30 kg
TV Dimensions DxLxH
(with foot)
134 x 473 x 328 mm
TV Dimensions DxLxH
(without foot)
55 x 473 x 294 mm
Operating temperature
and humidity
0ºC up to 40ºC, 85%
humidity max

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Teleco TFV20D and is the answer not in the manual?

Teleco TFV20D Specifications

General IconGeneral
BrandTeleco
ModelTFV20D
CategoryTV
LanguageEnglish

Related product manuals