Need help?Do you have a question about the Teleco WFT402 and is the answer not in the manual?
Essential safety guidelines for operating the router to prevent hazards and damage.
Defines the proper applications and recommended usage scenarios for the Teleco router.
Lists prohibited or discouraged uses of the router that may lead to damage or void warranty.
Provides a comprehensive list of technical specifications including hardware, software, and environmental details.
Instructions for configuring the router using the web-based Graphical User Interface (GUI).
Details on how to manually configure the Access Point Name (APN) for internet access.
Information on connecting to the router's WiFi network using default credentials and security.
Steps to connect the router to the internet using a wired Ethernet connection via the WAN port.
Procedure to reset the router to its original factory settings to resolve operational problems.
Guide on using the Wi-Fi Protected Setup (WPS) button for easy client device connection.
Troubleshooting steps for when the router fails to operate correctly after setup.
Addresses a specific issue where internet is active, but WiFi is not.
Guidance on resolving issues preventing access to the router's web-based management interface.
Essential safety guidelines for operating the router to prevent hazards and damage.
Defines the proper applications and recommended usage scenarios for the Teleco router.
Lists prohibited or discouraged uses of the router that may lead to damage or void warranty.
Provides a comprehensive list of technical specifications including hardware, software, and environmental details.
Instructions for configuring the router using the web-based Graphical User Interface (GUI).
Details on how to manually configure the Access Point Name (APN) for internet access.
Information on connecting to the router's WiFi network using default credentials and security.
Steps to connect the router to the internet using a wired Ethernet connection via the WAN port.
Procedure to reset the router to its original factory settings to resolve operational problems.
Guide on using the Wi-Fi Protected Setup (WPS) button for easy client device connection.
Troubleshooting steps for when the router fails to operate correctly after setup.
Addresses a specific issue where internet is active, but WiFi is not.
Guidance on resolving issues preventing access to the router's web-based management interface.
General| Frequency band | 2.4 GHz |
|---|---|
| Wireless speed | Up to 300 Mbps |
| Maximum Data Rate | 300 Mbps |
| Antenna Gain | 5 dBi |
| Wi-Fi standards | 802.11b/g/n |
| Ports | 1 x 10/100 Mbps WAN, 4 x 10/100 Mbps LAN |
| Antennas | 2 x external |
| Security | WEP, WPA/WPA2 |
To Next Page
