Telecom Behnke a Series User Manual

Manual Door intercom devices a / b series 20 / 30 / 40 / 50 / 20-0028A/-0028B
Connection
GB
69www.behnke-online.com
Quick set-up (example) (code, value, confirmation)
(Always check with the operator)
▸ Connect the telephone line:
during the initialisation, there is a high-pitch beep for approx. 10 seconds.
▸ Enter set-up mode: *, 0000
▸ Enter telephone numbers
▸ first telephone number: 21, telephone number, #
▸ second telephone number: 22, telephone number, #
▸ third telephone number: 23, telephone number, #
▸ up to the ninth telephone number: 29, telephone number, #
▸ Activate group calling,
number of telephone numbers to be dialled: 20, 1 to 9, #
(Please note: the call reception terminal station
has to acknowledge the call with an DTMF tone)
▸ Volume control (optimum setting = 7) 06,
1 97
, #
▸ Non-isolated button at alarm input
(button carries a tension of 6 volts= to 24 volts=): 17, 6, #
▸ Activation of the 900-parameters: 900, 1, #
▸ Echo suppressor damping (remove acoustic feedback): 911, 15 to 20, #
▸ Microphone level: 913, 1 to 7, #
▸ Cabin button: Closing contact (is expected to be standard for 20-0028A) 970, 0, #
▸ Cabin button: Opening contact (change configuration step, closing contact standard) 970, 1, #
(Please note: this configuration section must be activated
before connecting the opening contact)
▸ Deactivation of the 900-parameters: 900, 0, #
▸ Exit set-up mode: *

Telecom Behnke a Series Specifications

General

Brand	Telecom Behnke
Model	a Series
Category	Intercom System
Language	English