Telecom Behnke 20-0043A-IP User Manual

anleitung
Version 4.2
D SIP-Sprechstellen Serie 5 / 10, Serie 20 / 30 / 40 / 50 / SPL Seite ....... 3
GB SIP intercoms series 5 / 10, series 20 / 30 /40 / 50 / SPL Page ...... 39
F Postes téléphoniques SIP Séries 5/10, Séries 20/30/40/50/SPL Page ...... 75
Kennen Sie schon die neue App „Behnke Anleitungen“?
Für iPhone und iPad einfach den QR-Code scannen
und gleich ausprobieren.

Telecom Behnke 20-0043A-IP Specifications

General

Category	Intercom System
Protection Rating	IP54
Type	Door Intercom
Communication	IP
Power Supply	PoE
Audio Codec	G.711, G.722
Network Interface	Ethernet

Summary

Contact

Important Information and Support Contacts

Safety guidelines and contact details for product support and services.

Introduction and System Requirements

Installation and System Prerequisites

Mounting, Sealing, and Maintenance

Configuration and Component Guidelines

Installation Procedures

Installing Series 20/30/40/50 Models

Detailed installation steps for specific Behnke SIP intercom models.

Wiring and Mechanical Mounting

Guides on wiring sequence, PoE requirements, and mechanical mounting of modules.

Component Connection and Label Insertion

Instructions for connecting ribbon cables, electronics, and inserting labels.

Mounting Universal and Series 10/50 Devices

Steps for mounting universal devices and pre-assembled Series 10/50 intercoms.

Connecting Intercom Systems

Series 20/30/40/50 & 20-0005-IP Connection

Critical Wiring and Network Connection

Important notes on button wiring and network infrastructure setup.

Hardware Components and Connections

Compact Electronics Overview (Series 20-50)

Remote Electronics Hardware (20-0005-IP)

Configuration and Initial Setup

Initial Connection and IP Configuration

Static IP Address Configuration

Web Interface Login and Call Adjustments

Autoprovisioning Methods

Automated SIP Intercom Setup

DHCP Option 66 and Server Configuration

Resetting to Default Settings

Factory Reset Procedures

Step-by-step guide for resetting the intercom to factory defaults via button and web interface.

Camera Access and Configuration

Camera Access and DHCP Requirement

Web Interface Login and User Access

Instructions for logging into the camera's web interface with different access levels.

Camera Reset to Default Settings

Procedure for resetting camera modules to default settings.

Technical Specifications

Safety, Administration, and Electrical Specs