Telecom Behnke 20-0043A-IP User Manual

42 www.behnke-online.de
GB
Instructions for Behnke SIP 2.0
Introduction
The Series 5 and 10 compact intercom stations
are pre-assembled high-quality intercom
stations with up to two call buttons. They
also feature acoustic echo cancellation, and
consequently provide full-duplex, hands-free
communication with optimum quality. These
intercom stations come with two relays that may
be configured according to your liking.
Series 5 and 10 intercom stations also come
with a wide-angle IP camera developed by
Behnke. The camera provides video images
with HD resolution of up to 1280 x 720 pixels.
The camera features a large field of view with a
horizontal angular aperture of 180°. Addition-
ally, the camera features IR-LED illumination
for night vision. The video may be transferred
to a video surveillance system via RSTP stream.
Motion-JPEG and H.264 are available as com-
pression methods.
The Behnke IP camera in the Behnke SIP
intercoms stations of the 5/10 series requires a
DHCP server to function as an IP camera.
The IP camera of the Behnke 5/10 series SIP
intercom stations cannot be operated with
static IP addresses. This function is reserved
solely for the manufacturer for service pur-
poses.
System Requirements
Please note the following minimum system
requirements when installing a Behnke SIP door
intercom station:
▸
PC or Apple
®
Mac
®
with browser (e.g. Micro-
soft
®
Internet Explorer
®
, Mozilla Firefox
®
,
Apple
®
Safari
®
)
▸
Monitor/graphics with a resolution of at least
800 x 600 pixels and true colour display
▸
Set-up network connection
▸
A free Ethernet port with PoE or a separate
PoE injector.
▸
SIP Account, SIP server or a remote station to
directly accept SIP connections.
▸
Behnke IP cameras in 5/10 series SIP intercom
stations require a DHCP server

Telecom Behnke 20-0043A-IP Specifications

General

Brand	Telecom Behnke
Model	20-0043A-IP
Category	Intercom System
Language	English