41www.behnke-online.de
GB
Instructions for Behnke SIP 2.0
Introduction
1.
introduction
1.1. What’s in the box
▸
Basic electronics as
•
electronics boxes Series 20, 30, 40, 50 or
•
as compact intercom station of Series 5, 10
▸
The present instructions
▸
Supplement information "Setting up the SIP
App TC Behnke"
(Setting up the “SIP App TC Behnke” only for
Series 5, 10 with IP camera)
Please note: Keep the supplement in a safe
place. Without the supplement information,
you will not be able to activate the app func-
tionality. Keep all passwords in a safe place.
The camera is equipped with special software
to enable smartphone access.
1.2. General information
Features
With Behnke*s Series 20, 30 and 50 SIP
intercom stations, you get high-quality modular
VoIP-intercom stations with acoustic echo can-
cellation for full-duplex, hands-free communica-
tion with optimum voice quality. All the device
elements like speaker, microphone, keypad and
call buttons as well as the electronics unit are
completely assembled in in a two-piece hous-
ing. The modular design enables utmost flexibil-
ity for planning and implementation. Calls are
connected via Voice over IP (VoIP) using the SIP
standard inside the connected Ethernet LAN,
either by means of a telephone system featuring
SIP, an SIP provider or via direct dialling of an
IP address. A simple web browser is used to
implement device configuration and software
updates, power is supplied via the LAN (PoE). It
is possible to connect external call buttons to
the intercom stations, and they feature freely
configurable switching outputs to open the
door, show the incoming call or provide addi-
tional switching functions. Extension modules
enable a retrofitting of additional features, e.g.
a 4-row display with a telephone book function
or up to 100 direct call buttons.
To Next Page
Loading...
Need help?
General
