To Next PageTo Next Page
Need help?Do you have a question about the Telecom Behnke 20-0001BS Series and is the answer not in the manual?
General| Brand | Telecom Behnke |
|---|---|
| Model | 20-0001BS Series |
| Category | Intercom System |
| Language | English |
Key safety and usage guidelines to be followed before and during installation and operation.
Lists all components included in the product package for the intercom station.
Provides an overview of product features, capabilities, and system requirements.
Specific mounting instructions for the 20-0001-BS, 20-0014-BS, and 20-0016-BS series intercoms.
Details the steps for mechanically assembling the series 20 intercom modules and frame.
Explains how to secure intercom modules within the frame using the module housing.
Guides on connecting various components like speakers, microphones, and buttons to the basic electronics.
Instructions on how to insert and secure the labeled nameplates for the intercom station.
Specific installation guidance for the Series 50 door intercom stations.
Details how to connect and operate the intercom station as a SIP device within a network.
Guides on selecting the operating mode (Analogue, SIP, Intercom) using the configuration key.
Provides troubleshooting steps for issues encountered during the initial startup of the device.
Offers solutions for problems arising after a configuration change, including factory reset.
Explains how to configure and operate the station in analogue (a/b) mode.
Guides on connecting and powering up the intercom station for analogue (a/b) operation.
Details configuration methods for analogue mode via phone, display, keypad, or web frontend.
Outlines the sequence of configuration steps for various device settings.
Settings for enabling and using the network configuration mode, including WiFi access.
Options for connecting the device to the network (Wired Ethernet, VLAN, WiFi).
Configuration for how the device obtains an IP address (Static, Dynamic, Link-local).
Guidance on performing software updates for the intercom station via web browser.
Basic settings like language, operating mode, and configuration methods.
Technical specifications related to the SIP phone functionality, including protocols and codecs.
Specifications for integrating and using IP or USB cameras with the intercom station.
Features and specifications for touch display units, including phone functions and code lock.
Details call answering, connection, and disconnection parameters.
Specifications for the device's relays, including operating modes, voltage, current, and codes.
Specifications for trigger mechanisms like alarm input, sabotage, radar sensors, and scheduling.
Covers system configuration, firmware, auto-provisioning, API, special functions, and compliance.
Outlines product usage, safety precautions, liability, and compliance with regulations.
