99www.behnke-online.de
GB
Instructions SIP intercoms series 20-0001BS, 20-0014BS, 20-0016BS
Legal information
.
1. We reserve the right to change our products, without notice, in line with technical progress. As a result of continuous
development, the products illustrated may look different from the products actually delivered.
2. Reprints or adoption of texts, images, and pictures from these instructions in any media – given in full or as extracts –
require our express written consent.
3. The design of this manual is subject to copyright protection. We do not assume any liability for possible errors, content
errors and misprints (including technical data or within images and technical diagrams).
Information with regard to product liability:
1. All products from these instructions may only be used for the specified purpose. In case of doubt, please contact a
competent specialist or our services department (cf. telephone numbers).
2. Products with a power supply (especially when mains-operated at 230V) must be disconnected before opening or
during installation.
3. We are not liable for damages and consequential damages due to modifications of or changes to our products or due to
improper use. The same applies to improper storage or external influences.
4. Please observe the respective guidelines for working with voltages of 230V, mains-powered or battery-powered prod-
ucts, e.g. directives for complying with the electromagnetic compatibility or the Low Voltage Directive. Corresponding work
should only be performed by a trained technician who has experience in this area.
5. Our products comply with all technical guidelines and telecommunications regulations applicable in Germany and the
EU.
Image sources and originators: © stock.adobe.com
A male electrician works in a switchboard with an electrical connecting cable © puhimec / Modern home facade with
entrance, front door and view to the garden - 3D rendering © Wilm Ihlenfeld / Hardware tools including cordless drill and
monkey spanner © monticellllo
Electromagnetic
Compatibility
Low Voltage Directive