74 www.behnke-online.de
GB
Instructions SIP intercoms series 20-0001BS, 20-0014BS, 20-0016BS
Commissioning and configuration
4.7. Switch on hybrid intercom station operating as a/b intercom station
1
Connect to the on-site infrastructure (a/b port, power supply)
Preparation
▸
Mount the intercom station as described earlier in this manual
▸
Power up the intercom station (Behnke PoE injector)
▸
Connect the intercom station to the free a/b port
▸
Wait until the intercom station is started, the red then LED flashes continuously. See also page
25, Status LED.
1236
Optional
a/b port
twisted pair of wires
1 3
To Next Page
Loading...