Telecom Behnke 20-0001BS Series User Manual

76 www.behnke-online.de
GB
Instructions SIP intercoms series 20-0001BS, 20-0014BS, 20-0016BS
Commissioning and configuration
4.8. Configuration of the hybrid intercom station in analogue mode
▸
Configuration by phone via DTMF post-dialling/DTMF tone:
Call the Behnke intercom station and wait until it picks up and beeps [Beep]
Press the * key once within 2 seconds after the beep is emitted [Beep]
Enter security code (default: 0000) [Beep] [Beep]
▸
Via display (if available in the intercom station):
Press display key (with the key) to display the virtual keypad
Press * key briefly [Beep]
The virtual keypad is displayed in blue.
Enter the security code
(default: 0000) [Beep] [Beep]
▸
Via keypad (if available in the intercom station):
Press the * key briefly [Beep]
Enter security code (default: 0000)[Beep] [Beep]
▸
Configuration of the a/b intercom station via web frontend:
For this purpose, the intercom station must be integrated into a network infrastructure via LAN.
See item 4.1. (Operation of the hybrid intercom station as a SIP intercom station in the network)
or alternatively use the Behnke WLAN of the call station. Only suitable for configuration purposes
(must be started). See pages 72 and 73 "Configuration button for an already configured device"
the point "Starting/ending the network configuration mode".

Telecom Behnke 20-0001BS Series Specifications

General

Brand	Telecom Behnke
Model	20-0001BS Series
Category	Intercom System
Language	English