91www.behnke-online.de
GB
Instructions SIP intercoms series 20-0001BS, 20-0014BS, 20-0016BS
Commissioning and configuration
4.10. Reset to factory setting
Connect the a/b intercom station to the power supply (PoE see page 24).
Wait until the a/b intercom station has started (see point 1 page 24).
Press configuration key for 5 sec. and follow the announcements.
4.11. Software update:
To perform a software update of the intercom station, disconnect it from the a/b port and the power
supply (PoE). Integrate the intercom station into a network (optimally with Internet connection) (see
4.1. Operation of the hybrid call station as SIP intercom station in the network).
Perform software update via web browser. Also see "Help" in the web frontend of the door intercom
station.
To Next Page
Loading...
