88 www.behnke-online.de
GB
Instructions SIP intercoms series 20-0001BS, 20-0014BS, 20-0016BS
Commissioning and configuration
VLAN
Connection to a tagged VLAN
The VLAN tag can be set via configuration step 79.
VLAN for webcam only
Untagged connection for the device and providing a second network connection with a tagged VLAN
only to access the webcam.
The network connection for the webcam can only be configured via the web interface.
VLANs for device and webcam
Connection to a tagged VLAN and providing a second network connection with a tagged VLAN only
for access to the webcam.
The VLAN tag for the VLAN of the device can be set via configuration step 79.
The network connection for the webcam can only be configured via the web interface.
WiFi
Connection to a wireless network
In this case, the power supply to the device must be provided either by using a Behnke PoE injector
or ensured by additional connection to a PoE port. In order to achieve sufficient quality of the radio
connection, usually the connection of an external antenna module is required.
IP address assignment Default: 1
75 0 # static
1 # dynamic
2 # link-local
Here you can set how the device obtains an IP address.
Static = manual address assignment
The network administrator manages the IP addresses of the network. You have received an IP
address from the network administrator, which is entered via configuration step 76.
In this case, the associated subnet mask and gateway must also be specified
via configuration steps 77 and 78.
Dynamic = automatic address assignment
There is a DHCP server in the network that manages and distributes the IP addresses. The device
automatically tries to obtain an IP address from this DHCP server.
To Next Page
Loading...
Need help?
General
