97www.behnke-online.de
GB
Instructions SIP intercoms series 20-0001BS, 20-0014BS, 20-0016BS
Specifications
Authorisation times: Announcement of authorization times possible when a card is
detected outside of the valid time frames (only integrated operation)
Trigger
Features to be triggered: Call, group call with 2-4 numbers (not with analogue phone),
Call chain with 2-4 numbers, call according to schedule, door open always or
according to schedule, output individual voice announcement
Alarm input: 5-24 VDC
Triggering: with rising and/or falling flank
Debounce duration: 50-1500 ms
Sabotage: Triggering: via the contact for door opener button / sabotage, via the alarm input or,
in the case of a detached intercom station, via the sabotage contact of the door
module
Safety shutdown in case of sabotage: Disabling the network of the extension port
Radar sensor: available when connecting a radar sensor extension module
Triggering: for arriving and/or departing persons/objects
maximum detection range: 1-100 % (approx. 10 m)
Detection pause: 1-25 s
Radar sensor relay: Normally open or normally closed contact with an activation
time of 1-255 s
Schedule: Execute calls or commands at a specific time
Triggering: at the beginning and/or at the end of a valid time period
of the schedule
Acoustics
Noise detection: switchable: Measuring and evaluating ambient noise
Volume: 0-100 %
automatic increase of volume in noisy environment:
off or from a certain volume class (1-5)
Audio amplifier: 1 W output power
Microphone sensitivity: 0-100 %
Analogue audio: Transmitting/reception sensitivity: 50-150 %
Transmitting/reception gain: -10-10 dB
automatic sensitivity adjustment
Echo barrier
Echo cancellation
automatic gain control for microphone
To Next Page
Loading...
