Need help?Do you have a question about the Teledyne Echotrac MKIII and is the answer not in the manual?
General| Type | Echosounder |
|---|---|
| Category | Marine Equipment |
| Manufacturer | Teledyne Marine |
| Operating Temperature | -15°C to +55°C |
| Frequency | 200 kHz |
| Channels | Dual |
| Display | 10.4 inch Color LCD |
| Interface | Ethernet |
| Beam Angle | Varies by frequency (e.g., 7° at 200 kHz) |
Overview of the Echotrac MKIII echo sounder's features and capabilities.
Details the purpose, scope, and definitions of warnings, cautions, and notes.
Guide for installing the Echotrac DF 3200 MKIII recorder unit.
Procedures and considerations for mounting echo sounder transducers.
Details the pinouts and signal descriptions for all Echotrac MKIII serial and data ports.
Explains the operation of ON/OFF, FEED, TAKE-UP, and LIGHT controls for the chart recorder.
Details front panel knobs and switches for power, receiver gain, and transmitter power.
Configuration of transmit and receiver gain for high and low frequency channels.
Functionality of the MARK button for event marking and system reset.
Using the LCD display and keypad to access and modify system parameters.
Typical operating sequence for shallow water surveys.
Typical operating sequence for deep water surveys.
Procedure for calibrating the echo sounder for accurate depth measurements.
Defines serial output string formats for SBT and DBT data.
Methods for inputting chart annotation and event data via serial communication.
Details on controlling Echotrac parameters via Ethernet interface.
Description of Serial port 2 for connecting a remote display unit.
Description of Serial port 3 for GPS input and NMEA sentences.
Explains HEAVE input via Serial port 4 using TSS1 string format.
Reference to Technical Specification Ethernet Interface manual.
Step-by-step guide to upgrading firmware on Motorola processors.
Procedure for upgrading firmware on DSP and Transceiver processors.
Details connections between the LCD15 module and the MKIIIE sounder.
Contact information for customer support hotline and email.
Procedure for returning equipment for service, including RMA process.
To Next Page
