Teledyne SeaBat T Series Quick Reference Guide

SeaBat T-Series Rackmount
SeaBat T20-R / T50-R - Quick Reference Guide*
Version 2 Document Number QG14832 / Part Number 1008753 24/06/2020
SeaBat T-Series Rackmount
The SeaBat T20-R and T50-R multi-frequency
multibeam sonar systems for surface vessels:
 Depth rating: 50m
 Frequency: 190-420kHz
 Ping rate: Up to 50Hz (range dependent)
 Range: Up to 575m (200kHz)
 Power requirements: 100-230VAC, 50/60Hz,
up to 390W
1
max.
 Operating temperature wet end: -2°to +36°
 Operating temperature dry end: -5° to +45°
Rack-mounted Sonar Processor (RSP)
RSP
Height
88.0mm
Width
478.0mm
Depth
461.6mm
Weight
12.3kg-13.8kg
Sonar interface and processing functions combined
into one unit.
Projector Unit
T20 / T50: TC2181 200-400kHz
Height
86.6mm
Length
280.0mm
Depth
93.1mm
Weight in air
5.4kg
Weight in water
3.4kg
Standard Cables
Projector to RSP
Bend radius
73mm (minimum)
Cable length
T20: 10m
T50: 25m
Receiver to RSP
Bend radius
100mm (minimum)
Cable length
T20: 10m
T50: 25m
Receiver Units
T20: EM7219 200-400kHz
Height
123.2mm
Length
254.0mm
Depth
102.0mm
Weight in air
5.0kg
Weight in water
2.2kg
T50: EM7218 200-400kHz
Height
90.7mm
Length
460.0mm
Depth
102.0mm
Weight in air
8.2kg
Weight in water
3.9kg
Wet-End Brackets
T20
T50
Width
(projector end)
98.0mm
Width
(receiver end)
262.0mm
468.0mm
Depth
391.0mm
Weight in air,
bracket
1.7kg
2.5kg
Weight in air,
bracket + wet end
12.1kg
(excl. cables)
16.1kg
(excl. cables)
* This Quick Reference Guide is not intended as a substitute for the Operator’s Manual (provided on a USB key).
1
390W max. is for the INS configuration with dual head.

Teledyne SeaBat T Series Specifications

General

Category	Sonar
Manufacturer	Teledyne Marine
Series	T Series
Depth Rating	Up to 6000 m (varies by model)
Data Output	water column data
Interface	Ethernet
Weight	Varies depending on model
Maximum Range	Varies depending on model and frequency
Angular Coverage	Up to 160°
Power Supply	24 VDC to 48 VDC