Teledyne t100u - Appendix A-5: das Functions

APPENDIX A-5: DAS Functions
Table A-5: DAS Trigger Events, Software Version G.4
NAME DESCRIPTION
ATIMER Automatic timer expired
EXITZR Exit zero calibration mode
EXITLS
2, 3
Exit low span calibration mode
EXITHS Exit high span calibration mode
EXITMP Exit multi-point calibration mode
EXITBK
5
Exit background calibration mode
EXITO2
10
Exit O
2
calibration mode
SLPCHG Slope and offset recalculated
CO2SLC
11
CO
2
slope and offset recalculated
O2SLPC
10
O
2
slope and offset recalculated
EXITDG Exit diagnostic mode
PMTDTW PMT detector warning
UVLMPW UV lamp warning
DRKCLW Dark calibration warning
CONCW1
4
Concentration limit 1 exceeded
CONCW2
4
Concentration limit 2 exceeded
RCTMPW Reaction cell temperature warning
O2TMPW
10
O
2
sensor cell temperature warning
IZTMPW
1
IZS temperature warning
PTEMPW PMT temperature warning
SFLOWW Sample flow warning
SPRESW Sample pressure warning
VPRESW
2
Vacuum pressure warning
BTEMPW Box temperature warning
HVPSW High voltage power supply warning
1
T100/M100E.
2
T100H/M100EH.
3
Low span option.
4
Concentration alarm option.
5
Background concentration compensation option (6400E/6400EH).
10
O
2
option.
11
CO
2
option.
06807F DCN7335
A-21