9. Select the desired option using the "Up/Down" keys on the remote. Press "Enter". Your photos
have now been deleted from the internal memory
III. Selecting the type of files to play
1. Internal memory/Removable medium
If no medium has been inserted, the slideshow from the internal memory will launch automatically whenever
the frame is turned on.
If a memory card or a USB key is inserted when the frame is turned
on, the card or key's contents will be played.
In this case, you can switch from the card/key to the internal
memory as follows:
Press the 'Exit' key on your remote as many times as necessary for
the media selection screen to come up.
Use the 'Left/Right' keys on the remote to select the medium to be
read, then press 'Slideshow' on your remote. The slideshow will
then start.
2. Selecting a folder
You can play one of the previously saved folders in the internal memory, or play one of your personal folders
saved on a removable medium or in the internal memory in the 'Root' folder.
To do so, press the 'Exit' key on your remote as many times as necessary for the main menu to come up.
Using the 'Left/Right' keys, select the 'Files' icon. If you want to play a pre-programmed folder, select it
using the 'Up/Down' keys, then press 'Enter' twice. The slideshow of this folder will then launch.
If you want to play one of your own folders, first select the 'Root' folder, then the specific folder you want.
Then follow the steps above to launch the slideshow.
IV. Settings
On the main screen, select the "Settings" icon using the "Left/Right" keys on your remote to access the
different settings for your frame.
If a slideshow is playing, simply press the "Setup" key on your remote to access the settings menus.
When you are into the settings menus, the "Up/Down" keys on the remote allow you to select the
parameters to adjust, and the "Left/Right" keys allow you to choose the appropriate setting for the selected
parameter.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
