6 EN
Function Settings
1. Press to access into the [AUDIO MENU] mode, press and hold to enter into the [MENU] mode.
2. Press
repeatedly to select the item to be adjusted.
3. Turn the encoder volume knob to select a value/option.
[AUDIO MENU]...
Item Selectable Setting
BASS ADJUST
BASS LEVEL Adjust the level -7 to +7.
BASS CFQ Select the center frequency: 60/80/100/200.
MIDDLE ADJUST
MIDDLE LEVEL Adjust the level -7 to +7.
MIDDLE CFQ Select the center frequency: 0.5K/1.0K/1.5K/2.5K.
TREBLE ADJUST
TREBLE LEVEL Adjust the level -7 to +7.
TREBLE CFQ Select the center frequency: 10.0K/12.5K/15.0K/17.5K.
BALANCE Adjust the balance between the right and left speakers from 12R (full right) to 12L (full left).
FADER Adjust the fader between the front and rear speakers from 12R (full rear) to 12F (full front).
SUBWOOFER ADJUST
SUBWOOFER Adjust the level 0 to 12.
SUBWOOFER LPF Subwoofer low pass lter range: 80/120/160.
RESUME Resume the preset EQ value to factory default value.
[MENU]...
Item Selectable Setting
CLOCK
CLOCK SET Adjust the Hours and Minutes.
CLOCK FORMAT Select the time format 12H or 24H.
BEEP TONE Turn On or O this beep sound.
DIMMER Adjust the LCD display backlight level between Hight or Low.
VRD DISPLAY COLOR This unit is equipped with variable color display. Once into the DISPLAY COLOR mode, rotating encoder volue
knob to selected the LCD color.
■
COLOR SCAN (default setting); WHITE; GREEN 1; GREEN 2; GREEN 3; AMBER; PINK 1; PINK 2; PURPLE 1;
PURPLE 2; BLUE 1; BLUE 2; USER COLOR; ORANGE.
DEMO To automatically demo this unit’s major features cyclic on LCD display.
To Next Page
Loading...
Need help?
General
