10 CA824 Alarm System User Manual
The Entry zones are armed immediately (without exit time). The difference with the
Stay arming is that the Entry zones are armed immediately (without exit time) and an
intrusion into the Entry zones immediately starts the alarm.
The arming sequence is described by Figure 9 on Page 16.
In the following figures:
XX stays for the area number
ZZ stays for the zone number
S stays for the respective area status. It can be:
- – the area is not armed and is in normal state
+ – the area is not armed and has an active zone
f – the area is Full armed
p – the area is Stay armed
s – the area is Instant armed
o – exit time is running out
M – the area is Stay armed
A – the area is in an Alarm state
F – the area is in an Fire alarm state
– the area is not supported by the respective keyboard or not used
To Next Page
Loading...
