Need help?Do you have a question about the Teletek electronics BRAVO and is the answer not in the manual?
Procedure for enrolling detectors like PIR, MC, FD, and FL to the system.
Procedure for enrolling BRAVO RC key fobs to the system.
Procedure for enrolling BRAVO SR200/SR300 sounders to the system.
Checks signal strength and communication quality between devices and the panel.
Verifies communication by activating zones and checking panel response.
Temporarily disables devices or zones from system monitoring.
Restores detectors and sounders to their default factory settings.
Resets key fobs to their default factory settings.
Process of downloading configuration data from the panel to software.
Configures parameters for GPRS, PSTN, PSTN VD, and MOUT/PGM modules.
Reads system logs and performs firmware updates.
Secures all zones except bypassed ones for full system protection.
Allows users to stay in certain zones while partially arming the system.
Process of disarming the system.
Allows reviewing current and historical alarm events on the panel.
Displays and reviews system troubles indicated by devices or the panel.
General| Brand | Teletek electronics |
|---|---|
| Model | BRAVO |
| Category | Security System |
| Battery | 12V/7Ah |
| Humidity | 95% noncondensing |
To Next Page
