BRAVO – Wireless Alarm Control Panel
3
1. General Information for the System
BRAVO is a wireless alarm control panel suitable for
installation in residential houses and small offices. The
system is very easy to control via key fobs or
MobileTTE smartphone application*.
*requires GPRS module installed to the panel
Up to two communication modules (GPRS, PSTN,
PSTN VD or MOUT/PGM) can be added to the system
for programming via AjaxWEB web interface or
MobileTTE smartphone application.
Some additional settings are available via specialized
ProsTE programming software. The connection to the
panel is realized with a standard USB - mini USB
cable. The USB interface is located on the left outer
side of the panel’s box and it is accessible without
opening the front cover.
Available for purchase:
The BRAVO panel is available for purchasing as:
1. A control panel, without peripheral devices included;
2. A kit, including a control panel and a set of
peripheral devices, prepared in advance for direct
mounting on the protected site.
Supported types of peripheral devices:
To Next Page
Loading...
