20 CA824 Alarm System User Manual
In the above figure:
R indicates the event is restoring
XXX is the event sequential number
C stands for the event cause. It can be:
d – for device
u – for user
z – for zone
A.XX displays the number of the area, where the event has taken place
dd/mm is the date (day/month), when the event has taken place
hh:mm is the time (hour:minutes), when the event has taken place
All short and long messages and their meanings are shown bellow:
Message Long message Meaning
Medical Medical alarm
Medical type zone ZZ has been activated or a
Medical signal has been manually triggered off
from keyboard/device DD
Fire Fire alram
Fire type zone ZZ has been activated or a Fire
signal has been manually triggered off from
keyboard/device DD
Panic Panic alram
Panic type zone ZZ has been activated or a
Panic signal has been manually triggered off
from keyboard/device DD
Duress Duress
A UU code has been entered for duress
Alarm Burglary alarm
An Entry Delay, Follow or Instant type zone ZZ
has been activated
Alarm 24 hour alarm
A 24h Burglary type zone ZZ has been
activated
Tamper Tamper
A tamper type zone ZZ has been activated
ExpFail Exp. module fail
Connection with module DD has failed along
the bus
SenrTmp Sensor tamper
A self-arming zone ZZ sensor has been
activated
Exp.Tmp Exp. module tmp.
A self-arming module DD has been activated
24h nB 24h non-burglary
A 24h non-burglary zone ZZ has been activated
SystTrb System trouble
A PGM or AUX fuse of the main module has
failed
AC loss AC loss
220V mains power loss
Battlow Low system Batt.
Low system battery voltage
To Next Page
Loading...
