CA824 Alarm System User Manual 31
3)UserAttributes
* Attribute
Continues from the previous page
ENT
C. XX * UserName
2)UserAttributes
2
_
User attributes are set.
The user is allowed to perform actions marked with
and is not
*
allowed to perform actions marked with -.
Figure 15. Changing User Codes by a Manager
Attribute Action
Full Arming Permission to Full arm the system
Force Arming Permission to Force arm the system
Stay / Instant Arming Permission to Stay and Instant arm the system
Manager
Manager permissions – creating and changing user
codes
Bypass Permission to bypass zones
Disarming Permission to disarm the system
Time / Date Set Permission to set the system time and date
Log View
Permission to review the event memory for the areas,
which correspond to the respective user
To Next Page
Loading...
