Televic Confidea G3 - Page 2

© 2016 Aveo Systems, Inc.2
Installaon Steps
Congure the Access Point
1. Install the three antennae to the rear antenna connectors.
2. Power on the wireless access point by connecng the power
adapter and turning the access point’s power switch on.
3. Connect the included ethernet cable from your PC to the access
point’s ethernet interface.
4. Ensure your PC is on the same subnet (192.168.1.) as the access
point and has an IP address that is dierent from the access point’s
default IP address of 192.168.1.110.
5. Open your internet browser (Google Chrome recommended) and
enter the access point’s default IP address: 192.168.1.110.
Username: admin and password: admin
6. Select your desired language.
7. Scroll down on the menu icons and click . Select Open Access
for Unit Inializaon and click to return to the home menu.
Unit initialization
Init mode
Open access
Manual init
8. Click to get to the setup menu.
9. Click to set your region and supported frequency bands.
10. Click to navigate to the frequency band selecon.
11. Expand the desired frequency band and select a frequency by
placing a check mark in the box on the right.
Upper RLAN
5.580 GHz
5.600 GHz