Need help?Do you have a question about the Televic TCS5500 and is the answer not in the manual?
General| Brand | Televic |
|---|---|
| Model | TCS5500 |
| Category | Conference System |
| Language | English |
Safety instructions for operating the conference system and preventing hazards.
Lists the main components of the TCS5500 system setup.
Details the Televic Microphone System (TMS) components.
Details the Televic Interpretation System (TIS) components.
Lists various products that can form the central equipment.
Details the PS5500 power supply unit, its description, and features.
Details the INT5500 interface unit and its connections.
Details the IHS5500 interphone handset, its connection, and settings.
Explains flush-mounting microphones and jumper settings.
Details the ID5500 interpreter desk and its connections.
Describes the basic components and ports of the CPU5500.
Explains how to operate the system using PCs and Ethernet.
Shows the main menu flow and options.
Details part 1 of the conference menu flow.
Details part 2 of the conference menu flow.
Details part 1 of the interpretation menu flow.
Details part 2 of the interpretation menu flow.
Details part 3 of the interpretation menu flow.
Details part 4 of the interpretation menu flow.
Details part 1 of the AUX-IN/OUT menu flow.
Details part 2 of the AUX-IN/OUT menu flow.
Details part 1 of the System menu flow.
Details part 2 of the System menu flow.
Explains automatic and manual initialization of the microphone system.
Details different conference operating modes and their impact.
How to adjust microphone audio settings.
How to reset the microphone system.
Explains how to access and use microphone options, including test tones.
How to select the operating mode for the conference.
How to adjust delegate loudspeaker volume.
How to adjust delegate microphone settings.
Steps for initializing conference units automatically and manually.
How to use delegate conference units, focusing on the MICRO button.
Explains VIP unit functionality and assignment.
Details chairman unit functionality and the PRIOR button.
Guide to interpreter desk configuration.
How to assign languages to channels.
Defining booth and desk configurations.
Setting the A channel language.
Selecting languages for the B channel.
Explains the auto-floor setting for interpreter units.
Steps for initializing the interpreter system.
Step-by-step guide for setting up the interpreter system.
Setting the IP address for the CPU5500.
Setting the IP Netmask for the CPU5500.
Resetting the CPU5500 to default factory settings.
Procedures for manual and automatic replacement of microphones.
Replacing a defective interpreter desk.
Tests and diagnostics for communication issues with the PC.
Symptoms and causes of no PC communication.
Basic troubleshooting steps.
Procedure for replacing a blown fuse in the central unit.
Troubleshooting steps for a non-working delegate unit.
Basic connection examples for microphones, loudspeakers, and channel selectors.
To Next Page
