Televic TCS5500 User Manual

Appendix E
Installation manual to TCS5500 Appendix E ● 95
Appendix D: Messenger Control
panel
Overview
The TCS5500 Digital Conference & Interpretation System supports
a messenger control panel. The messenger panel enables the
conference manager to answer a request initiated by a delegate. To
use the messenger panel a ‘messenger button’ has to be provided
on the microphone panel.
If a ‘messenger button’ was pushed on a unit, a message will
appear on the message control panel which identifies the originator.
Now, the conference operator can activate and deactivate the
microphone that put the request using the ‘ack’ respectively ‘clear’
button on the messenger panel.
clearack.
Fig.: messenger Control Panel
The messenger panel must be connected to the CPU5500 central
unit through a RS232 connection. The appropriate port to use on
the CPU5500 central unit is COM1 or COM2. The choice of port
and baud rate can only be done through the operational control
suite software (CONFSYS).
A complete overview of the settings of the communication port for
the control panel:
Data bits:
8
Parity:
None
Stop bits:
1
Flow control:
None

Televic TCS5500 Specifications

General

Brand	Televic
Model	TCS5500
Category	Conference System
Language	English