EasyManua.ls Logo

Televic TCS5500 - CPU5500 IP Netmask Setup; CPU5500 Default Reset

Televic TCS5500
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TCS5500
Page | 73
IP Netmask
The IP Netmask of the CPU5500 Central unit can be set through
this menu item.
When the netmask has been changed, the CPU5500 will have to be
rebooted.
Time
The time of the CPU5500 central unit can be changed through this
menu item.
Date
The Date of the CPU5500 central unit can be changed through this
menu item
CPU5500 Defaults
The CPU5500 central unit can be reset to its default settings. All
TMS parameters that are necessary for a correct functioning will
then be set back to factory settings.
This requires a reboot of the central unit.
Init Mode
This functionality has not yet been implemented, and is therefore
not in use.
Version
The version of the CPU5500 operational software and the firmware
can be found through this menu item.
Test
This menu allows to test all LEDs and the LCD display of the
central unit.
Reboot
When a full reboot of the system is required, then following item
can be used to do so.
System
4 IP Netmask
IP Netmask
255.255.128. 0
System
5 Time
System
6 Date
System
7 CPU5500 Defaults
CPU5500 Defaults
Press ENTER to load
and reboot or press
EXIT
System
8 Init Mode
Init Mode
Normal
System
9 Version
Version
Program :xx.xx.xx
....
Firmware:xxxx
System
11 Reboot
System
10 Test

Table of Contents

Related product manuals