Need help?Do you have a question about the Televic Confidea G3 and is the answer not in the manual?
General| Brand | Televic |
|---|---|
| Model | Confidea G3 |
| Category | Conference System |
| Language | English |
Explains the guide's structure, icons, and how to use its information effectively.
Lists the specific products and firmware versions to which this manual applies.
Essential safety protocols for integrators, operators, and end-users of Televic systems.
Details FCC, ICES, and Japanese conformity and certification requirements.
Critical precautions for the safe handling, charging, and disposal of batteries.
Safety measures for electrical power connections, wiring, and grounding.
Describes the Confidea G3 system's components and general setup.
Covers WCAP introduction, wall and tripod mounting, and connections.
Details the features, controls, and indicators of delegate/chairman units.
Specifications, charging, handling, and installation of the battery pack.
Electrical, acoustic properties, and connector details for microphones.
Explains IEEE 802.11 standards used in wireless local area networks.
Details the system's basis on 802.11 standards and supported frequency bands.
Lists and explains the frequency bands supported by the Confidea wireless system.
Provides recommendations for optimal placement of the Confidea WCAP to ensure signal quality.
Instructions on optimizing WCAP antenna orientation for improved RF link quality.
Discusses WCAP's operational range and methods for extending it.
Step-by-step instructions for physically connecting and powering up the WCAP.
Guide to setting up local IP addresses and subnet masks for WCAP access.
Instructions for accessing the WCAP's web interface for initial configuration.
Covers accessing the configured WCAP and performing factory resets.
Overview of web server compatibility, home page, and menu structure.
Settings for hostname, IP address mode (static/DHCP), and API TCP port.
Procedures for selecting and managing wireless frequencies used by the system.
Steps for initializing delegate units via open access or manual methods.
Settings for microphone limits, modes (Direct Speak, Request, VOX), and LED behavior.
Adjustments for loudspeaker volume, microphone sensitivity, and audio routing modes.
Configuration for auxiliary audio inputs and outputs, including status and levels.
How to use the operator interface to monitor and control microphone units.
Options for language, region selection, and general system management.
Step-by-step guide to check, download, and install firmware updates.
Managing user login credentials and viewing device/system status details.
How to access and use the system logging for monitoring and analysis.
How to configure AES encryption for enhanced system security.
Procedure for obtaining and uploading the necessary CoCon license file.
Instructions for integrating the Confidea G3 system with the Plixus network architecture.
How to enable and configure the camera control feature using the WCAP web server.
To Next Page
