COUPLE CONFIDEA G3 WITH PLIXUS
The Confidea wireless system can be used on the Plixus network. For more information on how to configure
the WCAP in the Plixus architecture see the Plixus user documentation.
When a WCAP resides on the Plixus network this has a couple of consequences for the functionality of the
WCAP web server. When the WCAP is linked to the Plixus engine, most of the conference settings will be
configured on the Plixus engine and no longer on the WCAP.
The header (A) of the web server shows that the WCAP is coupled with a Plixus network. On the main page
you can also see that there is less information available and the message that the WCAP is couple with
Plixus. The only settings you can adjust are those that are displayed on the Home screen.
Figure 1-23 Home screen when Confidea G3 is coupled to Plixus
In Plixus mode you can still configure the frequency settings and the network settings. For all other settings
such as initialization and discussion options, you need to configure this on the Plixus engine.
When you want to update the Confidea WCAP and the WDUs you will have to uncouple Confidea from the
Plixus network.
COUPL E CO NF IDEA G 3 WITH PLIX US 83
To Next Page
Loading...
