USE THE OPERATOR MODE
In operator mode ( ) you can see which delegate is speaking or requesting to speak. You can also
(de)activate the microphone of units, or requests to speak. When you select the microphone mode
Operator, then microphones can only be activated using this screen. The image below explains which
actions are available on the Operator page.
Figure 1-19 The Operator page
A. Shows all available microphone units.
B. Shows which units are speaking or requesting to speak.
C. Click the Switch off button to switch off all microphones at once.
D. Click the microphone icon to activate a microphone. Active microphones are indicated by a red
microphone icon .
E. Click to switch off an individual microphone.
F. Click the icon to send the unit into request mode (green blinking microphone LED). Units in request
are indicated by a green request icon .
G. Color indicates to which group the delegate belongs.
USE THE O PER ATOR MODE 74
To Next Page
Loading...
