7.
Click Add in the IP address pane.
8. Enter an IP address in the range of the WCAP, for example 192.168.1.11. Fill in 255.255.255.0 as
subnet mask.
When you use mulyiple networks on your computer (for example when your computer is
connected to the Internet via WIFI, and it is connected to a central engine using a network
cable), do not fill in the default gateway.
9.
Click OK. You are now ready to access the Confidea G3 system.
Change IP Settings In MacOS
1.
Go to the Apple Menu and select System Preferences.
CONF IGURE IP SETTING S 48
To Next Page
Loading...
