Update Confidea G3
CHECK FIRMWARE VERSIONS
1.
Click Update versions in the main menu.
2. On this page you can see the firmware version of the WCAP (A) as well as the firmware version of
the delegate units (B)
3. To check whether you have the latest version, go to https://www.televic-
conference.com/en/confidea-g3-software-updates and select Confidea G3. On these pages you
can also see the latest release notes.
UPDATE FIRMWARE OF WCAP AND WDU
The same update procedure applies for the WCAP firmware as for the WDU firmware.
The update may take a while; do not turn off the device. During update you are unable to use the
device. When updating delegate units, check whether battery status is at least 50% and that you
have the least amount of interference. Interference will drastically increase the update time.
1.
Click Update versions in the main menu.
2. Go to https://www.televic-conference.com/en/confidea-g3-software-updates, select Confidea G3.
SY STEM CO NF IG UR ATIO N 76
To Next Page
Loading...
