General Information
Installation manual to TCS5500 General Information ●1
General Information
Safety Information
The Televic TCS5500 Digital Conference & Interpretation System
is state of the art and has been designed to meet quality.
Nevertheless, the individual components of the conference system
can cause danger for persons and material assets if the safety
requirements are neglected.
Read carefully the safety instructions and installation manual
before operating the system,
Use the conference system only as intended,
The conference system may not be set up by personnel not
familiar with the safety regulations,
Do not use the system close to water or moisture. For example
in an outdoors installation without precautions,
Openings in the enclosure may not be covered or blocked for
example by placing the equipment close to a wall. These
openings are necessary for ventilation. They ensure a reliable
operation and protect the installation from overheating,
Route the power and system cables in a way so that they are not
likely to be walked on. Also, make sure the cables and plugs
are not routed under or against heavy items as they could cause
damage,
Do not push an object or spill a liquid through the openings in
the enclosure. They could reach voltage points resulting in
electrical shortcuts. This can cause electrical shocks and fire,
Do not convert the conference system or alter it incorrectly.
Servicing this system may only be done by qualified service
personnel,
In case replacements parts are necessary, only use parts that are
approved by the manufacturer or have the same characteristics
as the original part. Using other parts may cause serious hazard
in the system,
Always plug out the system in case it is not used for a long time
or during a lightning storm. This will avoid damage due to
lightning or power line surges.
To Next Page
Loading...
Need help?
General
