EasyManua.ls Logo

Televic Confidea G3 - Page 3

Televic Confidea G3
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2016 Aveo Systems, Inc. 3
If your organizaon uses WiFi, select a 5GHz frequency band.
Choose a band that is not congested as indicated by a good signal
strength and not a band showing low signal strength .
12. Click and set the maximum number of open microphones.
Four (4) microphones is a commonly used number of open
microphones.
Set the discussion mode to: Group Discussion.
Set the Loudspeaker volume to: 12
Set the Microphone presets to: Average
13. Click to adjust the audio sengs. Expand the General
Sengs menu and set the values as:
Set Audio roung to distance conferencing if you intend to use
audio or video conferencing with the system.
Enable the analog Aux In and Aux out and set the levels to 10.
Posion the Access Point
The ideal locaon for an access point is in
the middle of the room mounted on the
ceiling, free from obstrucons.
Best pracces for posioning include:
Not behind obstacles
Not above the ceiling les
Not close to power trays
Not on a metal shelf or in an
equipment rack
Not on a pillar in the room (due to
shadows).
Mounng the access point 10 
to 15  above the oor and at least
18 in. from walls and ceilings.
Antenna Posioning
Posion the antenna so that it is oriented
so that the paern of the antenna covers
the area where the microphones are.
Ensure the antennae are not all pointed
directly at the end points. A good antenna
posion will improve system performance
At least 18 in
At least
18 in
At least 6 ft
Ceiling
Wall
Floor

Other manuals for Televic Confidea G3

Related product manuals