LT910-WW User Manual - Telic AG
Pg 4
1.3 Important notice
Due to the nature of wireless communications, transmission and reception of data can
never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost.
Although significant delays or losses of data are rare when wireless devices such as the
LT910WW terminal are used in a normal manner with a well-constructed network, the
LT910WW should not be used in situations where failure to transmit or
receive data could result in damage of any kind to the user or any other party, including
but not limited to personal injury, death, or loss of property. Telic AG accepts no
responsibility for damages of any kind resulting from delays or errors in data transmitted
or received using the Telic AG product, or for failure of the Telic AG product
to transmit or receive such data.
1.4 Safety and hazards
Do not operate the Telic AG product in areas where blasting is in progress, near
Hazards medical equipment, near life support equipment, or any equipment which may be
susceptible to any form of radio interference. In such areas, the Telic AG product
MUST BE POWERED OFF. The Telic AG product can transmit signals that could
interfere with this equipment.
1.5 Conventions used in this Manual
The following conventions for warning levels are used in this manual:
Warning
Warnings against hazards that may result directly in serious injuries or death in
case of nonobservance.
Caution
Warnings against hazards that may result in injuries in case of nonobservance.
NOTICE
To Next Page
Loading...