EasyManua.ls Logo

Telpro Cabinetizer 76 User Manual

Default Icon
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cabinet LiftsWorld’s Best
by
O P E R A T O R S M A N U A L
For Model 76
MADE BY
www.telproinc.com
Read and become familiar with this manual BEFORE operating unit.
WARNING
Before operating this equipment, thoroughly read this set of instructions, make sure you
understand them, and only then follow the step-by-step directions. Failure to do so could
result in serious property damage and / or serious bodily injury.
®
®
(Note: In this manual, the Cabinetizer
TM
is shown with the optional Drill Drive
TM
winch assembly)
Form 42-26-00-00 version 1.5
© 2012 Telpro Inc. All Rights Reserved.
Question and Answer IconNeed help?

Do you have a question about the Telpro Cabinetizer 76 and is the answer not in the manual?

Telpro Cabinetizer 76 Specifications

General IconGeneral
BrandTelpro
ModelCabinetizer 76
CategoryLifting Systems
LanguageEnglish

Summary

General Safety Warnings

Pre-Operation Safety Briefing

Read and understand this manual thoroughly before operating the unit to prevent property damage or injury.

Critical Safety Precautions

Operational Limits and Integrity

Adhere to weight capacity, check for damaged parts, and inspect straps before each use to prevent failure.

Safe Operation Practices

Do not roll loaded units, use only on level surfaces, keep body parts clear, and avoid electrical hazards.

Authorized Use and Parts

Use only as a material lift with factory authorized parts. Do not transport assembled units.

Situational Hazard Awareness

Be aware of environmental factors like obstructions, wiring, and floor changes.

User Components and Maintenance

Component Identification

Familiarize yourself with the key components of the Cabinetizer™ lift system.

Care and Storage Guidelines

Store in a dry place, lubricate parts, handle with care during transport, and avoid dropping components.

Assembly Procedures

Dolly Base Configuration

Step-by-step instructions for assembling the Cabinetizer™ with the Dolly Base.

Counter Base Configuration

Step-by-step instructions for assembling the Cabinetizer™ with the Counter Base.

Cabinet Installation

Installing Upper Cabinets (Before Base Cabinets)

Using the Dolly Base to install upper cabinets prior to the installation of base cabinets.

Installing Upper Cabinets (Over Existing Base Cabinets)

Using the Counter Base to install upper cabinets after base cabinets are already in place.

Related product manuals